We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
During the application of alkaline zinc plating additives, in order to ensure the quality of the coating, it is essential to strictly follow the process con...
During the application of acid tin plating brightener, how should one operate and manage? By mastering the control of cathode current density and stirring, ...
When using potassium chloride acid zinc plating additives, improper control of the plating bath composition can sometimes result in low potassium chloride c...
Why do spring components tend to become brittle after undergoing electroplating following electrolytic degreasing?
If the coating becomes scorched during the tin plating production, it will affect the production efficiency of the electroplating plant. To address the issu...
How to extend the service life of trivalent chromium zinc plating passivator?
If you want to enhance the chemical degreasing effect, what would you do? Probably most people would choose to increase the degreasing temperature. But that...
Why should the anode current density be lower than 2 amperes per square decimeter when using acid tin plating brighteners?
When using alkaline zinc plating additives, is it sufficient to simply follow the instructions in the manual to solve all problems? Actually, that's not the...
What are the problems with some non-cyanide alkaline copper brighteners available on the market?
