Why do many electroplating factories find it difficult to maintain and control the bath solution when using hard chromium additives?
During the use of chromating solution, if the operation is carried out in accordance with the procedures, the composition of the solution can be regularly corrected to ensure the smooth progress of production.
Because chromium deposition is sensitive and is controlled by only a small amount of catalysts (including sulfuric acid and chrome plating additives), it was considered even in the early stages that maintaining the proportion of the catalyst was the most important factor.
However, as a supplier of hard chromium additives, Bigely discovered that for a well-equipped analytical laboratory, it is quite troublesome to analyze such a low concentration of catalyst content. If it were an ordinary electroplating factory with less sophisticated equipment, the analysis results would be subject to controversy. Even if these problems do not exist, the validity of the test results still has room for discussion because the operational properties of the plating solution are affected by the total content of catalysts in the solution.
When the electroplating factory uses Bigely hard chrome additive, they can learn how to scientifically analyze the composition of the bath solution under the guidance of our engineers. This way, they can avoid unnecessary detours and prevent errors in the results due to incorrect analysis, and be able to correctly guide the on-site addition of bath solution components in the workshop. If the corresponding equipment is lacking, they can also send the bath solution to our engineers for assistance in analysis.
Why can you trust Bigely?
Guangdong Bigely Technology Co., Ltd. ,founded in 2003, is a high-tech enterprise integrating R & D，production, sales and service, specializing in the production of electroplating chemicals. As a fast growing electroplating chemicals supplier in China, Bigely has over 20 years' experience in electroplating additives production and own production base of 5000 square meters. We can produce 15,000 tons of electroplating additives every year, which can fully meet the needs of customers.
If you need our high-quality electroplating additives, please contact us. We can provide you samples for test, and also provide a series of services.
