We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
When using the trivalent chromium colorful zinc passivation solution, how will the pH value and temperature affect the quality of the film layer?
At a certain electroplating plant, when using an alkaline copper plating additive, the resulting copper coating appeared dull and the deposition rate was sl...
After using an electrolytic degreasing powder, if the coating fails to deposit properly on the tips, sharp corners, or protruding areas of the workpiece, th...
Why does the coating become rough when using the electroless nickel plating solution? It might be because insoluble substances are suspended in the plating ...
Why do workpieces tend to peel during electroplating after degreasing? Is this related to the electrolytic degreasing powder? Not necessarily. In this artic...
When using the electroplating nickel brightener, the reason why the nickel coating is prone to burning is numerous. For instance, excessive current density,...
When using the electroless nickel plating solution, what should be done to avoid malfunctions? On one hand, it is necessary to ensure that the operating par...
What are the reasons for the blistering failure of the coating? Besides the nickel plating brightener, it is also related to the surface condition of the wo...
To enhance the stability of the electroless copper plating solution, based on our years of production experience, we have identified four methods. These wil...
In the previous article, we discussed some factors that contribute to the poor stability of the electroless copper plating solution. So, what methods should...
