We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
At a certain electroplating plant, when using an alkaline copper plating additive, the resulting copper coating appeared dull and the deposition rate was sl...
When using the electroless nickel plating solution, what should be done to avoid malfunctions? On one hand, it is necessary to ensure that the operating par...
To enhance the stability of the electroless copper plating solution, based on our years of production experience, we have identified four methods. These wil...
When an electroplating factory uses the electroless nickel plating solution, due to the fact that the electroless nickel plating reaction process is influen...
Why do burrs appear on the plating layer when using acid copper brighteners? This is the result of monovalent copper interference. Monovalent copper undergo...
After using the tin plating brightener, a layer of oxide film tends to form on the surface of the tin coating. How can this be resolved?
During the application of tin plating brightener, many factors can lead to poor brightness of the coating and rough crystallization. However, the main facto...
During the process of preparing the tin plating solution (containing acid tin plating brightener), why does turbidity occur? In this article, we will analyz...
Why can't the oil stains on blind holes and threaded holes be thoroughly cleaned? This is not only because the cleaning techniques were not mastered properl...
When using potassium chloride acid zinc plating additives, improper control of the plating bath composition can sometimes result in low potassium chloride c...
