The electroplating factory must consider the issue from the perspective of achieving good economic benefits, and select the appropriate chemical degreasing powder. Why is this so? Let's analyze it.
In the pre-treatment process of electroplating, several key points need to be considered: the chemical properties of the material to be treated, the types of dirt adhering to the workpiece, and the time required to remove these dirt. However, cost should not be overlooked either.
It is well known that the failure of the coating quality is often caused by poor pre-treatment. Therefore, if the treatment time is shortened at will, cheaper chemical degreasing powders and other chemicals are used, and processes are omitted, although this may increase economic benefits, the result is that the number of defective products increases. Then the saved costs will be offset, and it will become meaningless.
If one aims to scientifically enhance economic efficiency and intends to clean the workpieces within a certain limited period, as a supplier of chemical degreasing powder, Bigely believes that electroplating plants should, when considering the pre-treatment process, at least divide it into two stages. The first stage is the preliminary treatment, during which most of the dirt adhering to the workpieces (including oil stains) are removed. The second stage is the fine treatment, where the remaining small amount of dirt is removed and the surface of the substrate is activated to prepare the best substrate surface for electroplating.
About us
Guangdong Bigely Technology Co., Ltd. ,founded in 2003, is a high-tech enterprise integrating R & D，production, sales and service, specializing in the production of electroplating additives. As a famous electroplating additives source manufacturer in China, our products are widely used to meet the plating needs of different industries and exported to many countries from all over the world. They can meet the environmental protection standard after use, mainly used in automobile parts, sanitary ware, electronic products, hardware, furniture, building accessories and other fields.
If you need our high-quality electroplating additives, please contact us. We can provide you samples for test, and also provide a series of services.
