In the production process of barrel nickel plating, it is very important to control the concentration of various chemical components to ensure the quality and uniformity of the electroplating. Nickel sulfate is a common nickel source in nickel plating process, and its concentration in plating solution has a direct influence on plating process. If the concentration of nickel sulfate is too high, it will produce a series of adverse effects.
The deposition rate of the copper pyrophosphate plating process depends on a number of factors, including the composition of the bath, operating current density, temperature and agitation conditions. In general, when properly operated, copper pyrophosphate plating can achieve relatively fast deposition rates to ensure productivity.
Sulfamate nickel additive is a chemical used in nickel plating process. As an electroplating additive, nickel sulfamate plays a lot of positive roles in improving the quality of nickel plating layer. The following are some possible benefits of using nickel sulfamate additive in electroplating process:
If you want to increase the salt spray test performance of electroless nickel plating layer, it means to improve the corrosion resistance of the coating in simulated Marine or salt corrosion environment. Typically, a salt spray test is an accelerated test used to assess the corrosion resistance of a material, and the coating is subjected to a high concentration of salt water mist over a period of time. In order to improve the performance of electroless nickel plating in salt spray testing, the following measures can be taken:
In the zinc electroplating process, many electroplating plants feedback in the production process of the coating surface white spots, there are many reasons for such failures, only from the source, in order to solve the problem. In this article, we will take a look at the relevant reasons.
