PL-1 plastic electroplating hydrophilic agent (plastic electroplating surface finishing agent) is specially used in the first process of chromic acid roughening solution for plastic electroplating. After adding, it will make the plastic surface more hydrophilic, which is beneficial to the subsequent chromic acid roughening solution. Produces more uniform corrosion, especially in cracks, hiding deep holes and joints; it can also protect the chromic acid coarsening solution and extend its service life.
After adding , it will make the plastic surface more hydrophilic, which is beneficial to the subsequent chromic acid roughening solution. more uniform corrosion, especially not in the fracture, and hidden deep connection ; it can also be of the chromate roughened protect solution, and can extend its life.
Roughening additive PL-2 is a unique surfactant mixture used to reduce surface tension and eliminate. Remove the chromium mist and reduce the carry-out in the chromium tank. This multifunctional wetting agent is stable, economical and environmentally friendly.
PL-2 roughening additive is a unique surfactant mixture used in the chromic acid roughening solution for plastic electroplating . It can reduce surface tension and eliminate chromium fog; at the same time , it can also help clean the surface of plastic parts. To reduce the bad influence of chromic acid on subsequent processes , this multifunctional additive has the characteristics of stability and
As we all know, after the coarsening of chromic acid and sulfuric acid, chromic acid has serious harm to each electroplating step. PL-3 is a unique liquid mixed solution with good chromium capacity and fast reduction speed. This process is used to neutralize the hexavalent chromic acid staying on the surface of the workpiece and hanger
As we all know, after the coarsening of chromic acid and sulfuric acid, chromic acid has serious harm to each electroplating step. PL-3 is a unique liquid mixed solution with good chromium.capacity and fast reduction speed. This process is used to neutralize the hexavalent chromic acid staying on the surface of the workpiece and hanger.
PL-5 plastic electroplating palladium activator is an acidic activator, mixed with hydrochloric acid. It is designed for plastic electroplating. This activator is very stable and has a long service life.
Palladium water is an acidic activator, mixed with hydrochloric acid . It is designed for plastic electroplating. This activator is very stable and has a long service life.
PL-6A Plastic plating accelerator is a special mixture of dry substances. When it is dissolved in water, it can activate the surface of the pre-cured copper or nickel plastic. This product can provide a wide range of operating parameters, and is particularly suitable for bulky ABS and Noryl products. PL-6A Plastic plating accelerator has a good ability to reduce the concentration of metal impurities in the solution, because if the concentration of these impurities reaches a certain standard, it will hinder normal and complete acceleration.
PL-6A Description: plastic plating deflocculant a Species specific dry matter of the mixture. When it is dissolved in water when , can activate pre-feed line of copper or of a nickel of the plastic surface. This product can provide a wide range of operating parameters , and is particularly suitable for bulky ABS and Noryl products .
PL-7 electroless nickel plating additive can deposit a smooth, continuous, and good adhesion nickel layer on the surface of the activated plastic. Not only the nickel deposition speed is fast, but also the contact that can be electroplated can be established around the contact. point. PL-7 has good process stability, simple operation and maintenance. Suitable for plastic and various metal substrates, such as aluminum, steel, copper and their alloys.
PL-7 chemical plating of nickel additive can be activated on a good plastic surface, depositing a layer of a smooth, continuous, good adhesion of the nickel layer, deposition speed not only nickel, but also to be able to establish contact with the contact for the plating around point.
