Electrolytic oil removal in electroplating production is a pretreatment process that utilizes an electrolytic process to remove oil and organic contaminants from the surface of metal workpieces. Cleaning the metal surface prior to plating is critical, as oil and grease can hinder the uniform deposition of the plating layer and may lead to quality problems such as peeling and flaking of the plating layer. Electrolytic oil removal powder is a chemical agent used in industrial production to remove grease and other impurities from metal surfaces, mainly by electrolysis. The following factors should be considered when selecting a suitable electrolytic degreasing powder:
In the electroplating process, removing wax is an easily overlooked but important production process. In this article, we will introduce the definition of dewaxing water and the role of Bigely dewaxing water in the electroplating production process.
As we all know, in the production process of plastic plating, the colloidal palladium adsorbed on the surface of the plastic workpiece after palladium activation does not have catalytic activity, which is due to its surroundings are wrapped by divalent tin ions, the use of plastic plating accelerator can dissolve the palladium around the divalent tin so that it is exposed to deal with, so that palladium ions will have catalytic activity. So what do we need to pay attention to when we use the plastic plating accelerator?
Inadequate roughening during the plastic plating production process can cause a number of problems that can affect the quality and performance of the final product. The following are problems that may be caused by inadequate roughing:
The quality requirements of the trivalent chromium black zinc passivation process in the electroplating field usually include the following aspects:
In the production process of electroplating, do you have such a distress: workpiece after zinc plating after trivalent chromium blue zinc passivation, placed for a period of time the surface will be yellow, seriously affect the quality of the product, the customer will not accept such a product, then what to do?
