In the electroplating process, removing wax is an easily overlooked but important production process. In this article, we will introduce the definition of dewaxing water and the role of Bigely dewaxing water in the electroplating production process.
I. What is dewaxing water?
Dewaxing water, as the name suggests, is a special cleaning solution used to remove wax from the surface of a workpiece. It is usually made of a certain proportion of alkaline substances and co-surfactants. Wax remover has good permeability, emulsification and strong decontamination ability, which can quickly decompose and remove all kinds of oil and wax stains left on the surface of the workpiece during the process. It is mainly used in pretreatment before electroplating to create good basic conditions for electroplating.
II. The role of Bigely dewaxing water in electroplating production
1. Improve plating adhesion and uniformity
Before a workpiece is plated, it needs to be cleaned with Bigely wax remover to remove oils, waxes and other contaminants from its surface. This is because any contaminants will affect the bonding between the plating layer and the substrate. By removing the dirt through the wax removing water, the surface of the workpiece achieves a certain level of cleanliness, which ensures a good bonding between the plating layer and the substrate and improves the plating adhesion. At the same time, the cleaned surface of the workpiece is free from contamination by wax, oil and other impurities, which makes the electrolysis process proceed smoothly and the thickness and distribution of the plating layer more uniform.
2. Reduction of defects in the plating process
Residual wax stains and other impurities on the surface of the workpiece can have many adverse effects in the plating process. Oil stains can destabilize the plating bath and lead to poor plating; wax stains are deposited on the anode electrode, reducing the anode current efficiency and affecting the plating speed. By using wax removal water to clean the surface of the workpiece, these problems can be avoided and the success rate of electroplating can be improved.
3. Extend the service life of electroplating bath
As the dewaxing water removes the dirt on the surface of the workpiece, the oil and wax stains on the surface of the workpiece will not be carried into the plating bath. This reduces the amount of contaminants in the plating bath, which in turn reduces the level of contamination in the plating bath and extends the life cycle of the plating long bath, thus saving costs.
4. Improve the quality of plated products
Clean the surface of the workpiece, can make the plating layer complete, uniform, flawless, not only improve the aesthetics of the product, but also has a better corrosion resistance, good bonding force, so that in the process of use, the plating layer is not easy to fall off, blistering, cracking, prolonging the service life of the product.
The dewaxing process, as an important part of the plating production process, does play an important role even though it is easily overlooked. The use of Bigely dewaxing water cleans the surface of the workpiece of oil and wax stains and other impurities, providing a clean, non-polluted surface of the substrate for plating. This improves the bonding between the plating and the substrate, increases the uniformity of the plating, reduces the influence of contaminants, and improves the quality of the plated product. Therefore, in electroplating production, dewaxing water does play an indispensable role.
