We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
Degreasing before plating is an indispensable step in the plating process, and is the key to ensure good adhesion and surface finish of the plated layer. Th...
Oil removal is an indispensable step in the plating process and is the key to ensuring good adhesion and surface finish of the electroplating. This article ...
When we use acid zinc plating brightener in the production process, sometimes the coating of the workpiece will appear streaks, what is going on?
When the copper pyrophosphate brightener is used in electroplating production, the plating layer is prone to streak failure, what is the cause of this, and ...
In the production of copper pyrophosphate plating process, if the pH value is high, it often affects the quality of the coating. Therefore, we need to know ...
Turbidity in electroless nickel plating solutions can be caused by a variety of reasons. The following are some of the common causes of cloudy electroless n...
The roughness of nickel plating layer is closely related to the nickel plating brightener used. Brightener is a chemical additive added to the plating solut...
The roughness of the nickel plated layer is closely related to the nickel plating brightener used. Brightener is a chemical additive added to the plating so...
The quality of tin plating additives has a direct relationship with the color of tin layer and the overall coating quality. Poor quality tin plating additiv...
