We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
When we use alkaline zinc plating additives to produce, electrolytic treatment of plating solution is a commonly used method to remove impurities.When energ...
In the production process of using alkaline zinc plating brightener, sometimes the deposition rate of the zinc coating on the workpiece is relatively slow, ...
Some customers inquired about what problems would be caused by a too high pH value when using a copper pyrophosphate brightener.
We all know that the process of electroless nickel plating is different from other electroplating processes, and the requirements for pre-treatment are also...
Many customers encounter this problem during the production process of galvanized color passivation agents.
When we use nickel plating brighteners, we always encounter such a phenomenon: the workpiece is very clean in the pretreatment, but the plating layer has pi...
When we use nickel plating brightener for production, sometimes the workpiece is very clean in the pretreatment, but the coating has pinholes after nickel p...
When we use nickel sealing additives to produce, to obtain a good nickel sealing coating, the preparation sequence of the plating solution is very important...
When we use alkaline galvanizing brighteners, why is the plating solution contaminated with chloride ions? In this issue, we will analyze how chlorine ions ...
A customer inquired about the issue during the production process of using elestroless nickel solution. Originally, the addition amount of the plating solut...
