We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
During the production process of using the phosphorus electroless nickel plating solution, some customers have reported that the walls and bottoms of the ch...
In the production process of using matte tin additives, sometimes there may be black spots or black spots on the workpiece coating, which affects the qualit...
In the production process of using acidic zinc plating brightener, sometimes there may be stripe defects in the coating of the workpiece. What is the reason...
In the production process of using sulfate tin plating additives, the edges and corners of the workpiece are prone to burning. What is the reason for this?
In the production process of using sulfate mist tin additives, sometimes there may be poor coverage of the coating, which affects the quality of the coating...
In the production process of using acidic zinc plating brightener, sometimes the surface of the workpiece coating may appear foggy and floral. What is the r...
We are using trivalent chromium colored zinc passivation solution for a long time, and the corrosion resistance of the workpiece is poor. The salt spray tes...
What are the reasons for the poor adhesion and blistering of the galvanized layer on the workpiece during the production process using acidic zinc plating b...
In the production process of using alkaline cyanide free zinc plating brightener, sometimes the coating in the low current density area of the workpiece wil...
The use of trivalent chromium colored zinc passivation solution can sometimes result in poor adhesion and easy detachment of the passivation film on the coa...
