We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
In the production process of using zinc plating trivalent blue passivation, sometimes the film layer of the workpiece will appear partial whitening, like fo...
When the use of electroless nickel plating solution encountered faults, how would you troubleshoot? Some plating plant will focus on the plating solution, t...
Blackening of the plated layer in the barrel tin plating process is a complex problem that involves a number of factors, including the composition of the pl...
Plastic plating process as a more mature process, people for the plating quality requirements are higher and higher, but for a variety of reasons, the plati...
The zincate galvanizing process results in the appearance of pockmarks in the plating, which can be caused by several different factors. Pocking is a phenom...
In the production process using alkaline galvanizing brightener, if the plating solution is contaminated with heterogeneous metal impurities and electrolyti...
Electroplating nickel and electroless nickel plating are the main methods of nickel plating, but they have obvious differences in operation process, coating...
Hard chrome additive application process, due to the hexavalent chromium layer is easy to passivate (trivalent chromium chromium plating layer in trivalent ...
Why is it not recommended to use hard chrome additives containing fluoride during the production of electroplated hard chrome? This is because of the proble...
When we use potassium chloride galvanizing brighteners for production, if there is good mixing, then it can reduce the sensitivity of the coating to impurit...
