Mr. Chen is the owner of an electroplating factory in Xiamen, Fujian, engaged in the production of various hardware rolling galvanizing processes. Previously, Mr. Chen used a certain brand of acid zinc plating brightener, which resulted in a high amount of organic decomposition products in the plating solution. The coating on the workpiece was prone to adhering to these organic substances, and even after two washes, it could not be cleaned completely. After passivation, the coating on the workpiece was prone to discoloration. So Mr. Chen wants to replace it with an acidic zinc plating brightener with less organic impurities and less discoloration of the coating.
One day, Mr. Chen found Guangdong Bigley Technology while searching for "Acid Galvanizing Brightener Manufacturer" online. After understanding Bigley's company's basic information and product information, he inquired whether there was an acid galvanizing brightener suitable for him. After understanding Mr. Chen's production situation, Bigley engineers recommend that Mr. Chen use Bigley's water-soluble acid zinc plating brightener BZ-525.
This water-soluble acid zinc plating brightener BZ-525 is a product jointly developed by Bigley and European and American laboratories. It uses the water-based formula prepared with imported raw materials and low foam. During the production process, the brightener has fewer decomposition products, and the plating solution is stable. After the workpiece is galvanized, the surface will not be attached with organic impurities. Water washing is simple, and the workpiece will not change color after passivation. The engineer provided several on-site production photos of customers for Mr. Chen to see. After considering, Mr. Chen decided to purchase two barrels of this acidic zinc plating brightener BZ-525 to try.
Under the guidance of the engineer, Mr. Chen used this water-soluble acid zinc plating brightener BZ-525 and found that the stability of the plating solution was very good. After a long time of production, the plating solution remained clear, and any workpieces that fell out of the groove could be clearly seen and promptly salvaged. Moreover, the washing of the workpieces was simple, and there would be no discoloration after passivation. Moreover, the positioning performance and corrosion resistance of the coating were much better than before. It is worth mentioning that the defect rate of the workpiece is greatly reduced, and the frequency of plating solution treatment is reduced, effectively reducing production costs. So Mr. Chen signed a long-term cooperation purchase and sales contract with Bigley.
So, our acidic zinc plated workpieces have a lot of organic impurities in the plating solution during the production process, and the coating is prone to discoloration after passivation. It's worth trying BZ-525, a water-soluble acidic zinc plating brightener, to effectively reduce the defect rate of workpieces and greatly reduce production costs. If you are interested in this water-soluble acidic zinc plating brightener, you can contact Bigley customer service to obtain free samples and detailed technical information!
