In the pre-treatment stage of the plating process, conventional pickling processes (hydrochloric acid, etc.) are usually used to remove oxidized layers and rust from the surface of the workpiece. However, this process can lead to hydrogen embrittlement of the plated layer, which significantly affects the mechanical properties and service life of the plated product. Hydrogen embrittlement is a phenomenon in which the ductility and toughness of a material are significantly reduced in the presence of hydrogen, leading to an increase in its brittleness and susceptibility to fracture during use.
Electrolytic oil removal in electroplating production is a pretreatment process that utilizes an electrolytic process to remove oil and organic contaminants from the surface of metal workpieces. Cleaning the metal surface prior to plating is critical, as oil and grease can hinder the uniform deposition of the plating layer and may lead to quality problems such as peeling and flaking of the plating layer. Electrolytic oil removal powder is a chemical agent used in industrial production to remove grease and other impurities from metal surfaces, mainly by electrolysis. The following factors should be considered when selecting a suitable electrolytic degreasing powder:
In the electroplating process, removing wax is an easily overlooked but important production process. In this article, we will introduce the definition of dewaxing water and the role of Bigely dewaxing water in the electroplating production process.
Regarding the production of zinc alloy plating, why the plating layer will blister, we have summarized the following reasons and countermeasures:
The correct use of a plating dewatering agent can have a positive impact on the plated layer after the plated product has been rinsed in water. In this article we will talk about what benefits can be achieved.
Zinc-nickel alloy plating technology is excellent in terms of corrosion prevention performance, but in the actual production process, the plating solution will sometimes appear aging and yellowing phenomenon. This phenomenon not only affects the quality of plating layer, but also causes trouble to the production efficiency. The yellowing of zinc-nickel alloy plating solution is mainly related to the degradation of organic additives in the solution and the accumulation of impurities.
