We all know that the trivalent chromium blue zinc passivation workpiece needs to have a good bright blue appearance, but sometimes the appearance of the workpiece will appear yellow spots after passivation, which seriously affects the appearance quality of the workpiece.Is this yellow spot caused by improper use of trivalent chromium blue zinc passivation solution?
The trivalent chromium color zinc passivation workpieces we normally produce are uniform and bright color films, and sometimes the color of the passivated holes in the workpieces will be darker, showing yellowish green.Is this the improper operation of trivalent chromium color zinc passivator?
In the production process of alkaline galvanizing, sometimes there will be pitted bubbles in the galvanized layer of the workpiece, which will seriously affect the appearance of the workpiece and the performance of the coating, and the customer will not accept it.So does this phenomenon mean that the alkaline galvanizing brightener is used too much?
In the production process of alkaline galvanizing, sometimes the coating brightness of the workpiece is not enough, and the operator will add more alkaline galvanizing brightener to improve the brightness of the galvanizing layer.And sometimes the coating is not bright, even if the alkaline galvanized brightener is added, the brightness of the coating is not improved, why is this?
In the production process of using medium phosphorus electroless nickel plating solution, some customers reported that it is easy to deposit a layer of electroless nickel on the tank wall and tank bottom of the electroless nickel plating tank, which affects the product quality and shortens the service life of the plating solution.So, how should we avoid the deposition of chemical nickel on the tank wall and tank bottom during the production process?
In the production process of using alkaline galvanizing brightener, sometimes the galvanized layer of the workpiece will appear pitted small bubbles, which will seriously affect the appearance of the workpiece and the performance of the coating, and the customer will not accept it.o does this phenomenon mean that the alkaline galvanizing brightener is used too much?