In the electroplating process, degreasing is of great importance as a key pretreatment process. However, many electroplating factories often have to face a troublesome problem when electrolytic degreasing: frequent smoke and irritating odor during operation. These phenomena not only bring health hazards to the operators, but also seriously affect the environmental quality of the workshop. In this article, we will discuss the causes and solutions of this problem in depth, and provide suitable improvement measures for electroplating plant owners.
1. Analysis of causes
① Chemical reaction by-products: In the process of electrolytic degreasing, organic oil pollution may produce some gases when decomposing, and these gases sometimes have irritating odor.
② poor solution stability: some electrolytic degreasing solution itself is not stable enough, at high temperatures or in the electrolysis process will produce volatile chemicals, resulting in smoke and unpleasant odor.
2. Solutions
①Choose low volatility solvents: non-phosphorus alloy electrolytic degreasing powder BC-1108 in the design of the use of the process of the environment and the operator's health factors are taken into account, will not produce irritating odors.
②Control the operating environment: Ensure good ventilation, maintain an appropriate operating temperature, and reduce the impact of odor and smoke on the operating environment.
Why choose non-phosphorus alloy electrolytic degreasing powder BC-1108?
Phosphorus-free alloy electrolytic degreasing powder BC-1108 has the following four advantages in the market:
①No irritating odor: no pungent odor will be produced in the process of use, which is conducive to the maintenance of the workshop and production environment.
② Wide applicability: the product is suitable for electrolytic degreasing of many metals such as aluminum alloy, zinc alloy, copper alloy and steel, etc., with a wide range of applications.
③Fast cleaning: With BC-1108, it only takes 10-30 seconds to break down the oil pollution efficiently and clean it up to ensure the quality of subsequent plating layer.
Conclusion
By choosing non-phosphorus alloy electrolytic degreasing powder BC-1108 and optimizing the process parameters, we can effectively solve the problems of unclean ash, smoke and irritating odor in the process of electrolytic degreasing, and improve the product quality and production environment.
If you are interested in phosphorus-free alloy electrolytic degreasing powder, please feel free to contact us.
