Mr. Ding from Zhenjiang, Jiangsu is the owner of a processing factory that specializes in electroplating copper, nickel, and chromium on various automotive parts, electronic components, and other related products. Recently, Mr. Ding discovered during the production process that the acid copper plating solution produces a large amount of organic decomposition products after just a few days of treatment, leading to the phenomenon of pinholes and pitting on the workpiece coating, which seriously affects the quality of the workpiece coating. So Mr. Ding plans to replace it with a stable acid copper additive with fewer decomposition products.
One day, Mr. Ding saw Bigley's acid copper additive Cu-510 while searching online, so he inquired about the performance of this additive. The engineer learned about Mr. Ding's production situation when introducing this additive, so he recommended Mr. Ding to use this acid copper additive Cu-510.
This copper acid additive Cu-510 is based on the new R&D technology of Bigley, and TBC active ingredients are added to ensure that the plating solution has good chemical stability, no harmful decomposition products, and the coating is not easy to pitting and pinholes. This production is relatively easy and labor-saving, and can meet the performance requirements of copper acid plating on different workpieces. Mr. Ding also compared several different acid copper additives at the same time, and then decided to buy a bucket of Bigley's Cu-510 to try.
Mr. Ding used this acid copper additive Cu-510 under the patient guidance of the engineer, resulting in a uniform and bright coating on the workpiece with good alignment and filling performance. Compared with previous acid copper additives, the stability of the plating solution is much better. Previously, the acid copper plating solution had to be treated once a week, but now it has been continuously produced for half a month. The plating solution does not need to be treated, and the workpiece coating will not have pinholes, pits, and other phenomena, greatly reducing the defect rate of the workpiece, improving production efficiency, and saving production costs. Soon, Mr. Ding signed a cooperation agreement with Bigley.
So, when there are too many organic decomposition products in the acid copper plating solution and the coating is prone to pinhole pitting during the production process, try the acid copper additive Cu-510 from Bigley quickly to effectively improve production efficiency and save production costs. If you are interested in this acid copper additive, please contact Bigley customer service for free samples and detailed technical information!