In our daily production process, some large workpieces or workpieces with complex shapes will cause uneven thickness of the coating due to uneven current distribution during the process of nickel electroplating.At this time, we can use this medium phosphorus electroless nickel plating additive to solve the problem of uneven thickness of the coating.
Mr. Xiao's company is a large-scale textile equipment accessories processing factory in Anhui. His textile accessories need nickel plating to obtain a more wear-resistant and durable coating.However, Mr. Xiao's accessories often have uneven thickness of the coating due to the uneven current distribution during the nickel plating process, especially the accessories with complex shapes, which cannot meet the customer's requirements for the performance of the workpiece.
One day, Mr. Xiao learned about Bigolly's medium phosphorus electroless nickel plating additive Ni-809 through an Internet search.Bigolly engineer said:Using this electroless nickel plating additive, as long as the workpiece is immersed in the plating solution, the components of the plating solution can be replenished in time, and the thickness of the plating layer on each part of the workpiece is basically the same, even for grooves, gaps, and blind holes.Mr. Xiao was very interested in this process, so he decided to buy a barrel of this medium phosphorus electroless nickel plating additive Ni-809 first, and asked the engineer to guide the production.
Mr. Xiao opened a 300-liter plating tank, and under the guidance of the engineer, controlled the thickness of the plating layer according to the soaking time.As a result, the coating thickness of the workpiece is very uniform, and the bonding force and corrosion resistance of the coating are much better than those of the previous nickel plating;Moreover, the coating has good compactness, low porosity and low friction coefficient, which is very suitable for the performance requirements of these textile equipment accessories.Moreover, the coating has good compactness, low porosity and low friction coefficient, which is very suitable for the performance requirements of these textile equipment accessories.
Therefore, when the thickness of the plating on our accessories is very uneven after nickel plating, we may try to use Bigolly's medium phosphorus electroless nickel plating additive Ni-809.If you are also looking for such medium phosphorus electroless nickel plating additives, you may wish to contact Bigolly customer service, you can get free samples and detailed technical information!
