Mr. Li from Chongqing has his own acid galvanizing manual production line, mainly engaged in the galvanizing processing and production of various hardware accessories. Recently, Mr. Li discovered during the production process that the self prepared brightener has a slow light release speed and poor stability of the plating solution. He needs to stop working twice a week to process the plating solution, which will seriously affect production efficiency. Therefore, Mr. Li wants to search online to see how to improve the performance of acid zinc plating brighteners.
On this day, Mr. Li saw Bigley's acid zinc plating brightener BZ-528 while searching online, and learned about the characteristics of this brightener and inquired about how to improve the stability of the plating solution. After a detailed understanding of Mr. Li's production situation, engineers from Bigley explained to Mr. Li that due to the outdated formulation of the self-made brightener technology, the brightener's light output speed is slow, and there are many decomposition products of the brightener in the plating solution, making the plating solution relatively unstable. Not only will the amount of brightener be relatively large, but the quality of the workpiece coating be relatively poor, which will increase the failure rate and rework rate of the workpiece.
The acid zinc plating brightener BZ-528 produced by Bigel adopts Bigel's new R&D technology and imported raw materials. The solution has fewer decomposition products and high chemical stability, which can effectively reduce the frequency of treating the solution; The workpiece has a fast light output speed, which can shorten the electroplating time and improve production efficiency; The dosage of brightener is only 2ml/L, which effectively reduces the dosage of brightener and saves production costs. After Mr. Li learned about this brightener, he decided to buy a bucket and try it out.
Under the guidance of the engineer, Mr. Li used this acid zinc plating brightener BZ-528 and found that it was indeed much better than his own formulation, with fast light output, low dosage, and high plating solution stability. Mr. Li compared the production cost for a week and found that the production cost of using Bigley acid zinc plating brightener decreased by about 25% compared to the self-made one. So Mr. Li decided to use Bigley's brightener for a long time and signed a contract agreement.
So, when our handmade line uses the self prepared acid zinc plating process and there is slow light output and unstable plating solution, it is advisable to try Bigley's acid zinc plating brightener BZ-528. If you are interested in this acid zinc plating brightener BZ-528, please contact Bigley customer service for free samples and detailed technical information!