Mr. Xu from Tianjin is the owner of a processing factory specializing in the production of various copper bars and tin plating. Recently, Mr. Xu found that the dispersion ability of the plating solution was poor during the production process. However, according to the suggestions of the supplier, the content of sulfuric acid was increased and the content of stannous sulfate was appropriate. However, the dispersion ability of the plating solution was still poor, and the divalent tin in the plating solution was easily hydrolyzed. Due to the serious impact on the production efficiency of the workpiece, Mr. Xu intends to replace it with an acid tin plating brightener with a good dispersing ability.
One day, Mr. Xu saw Bigley's acidic tin plating brightener Sn-807 through an online search, so he inquired about the properties of this brightener and learned about its dispersion performance. After understanding Mr. Xu's production situation, Bigley engineers recommended Mr. Xu to use this tin plating brightener Sn-807.
This acidic tin plating brightener Sn-807 is formulated using new research and development technology from Bigley and imported raw materials. The brightener has a high concentration and few impurities, ensuring good stability, dispersion, and even plating performance during the production process. The plating solution is not prone to turbidity and hydrolysis, and remains clear after long-term production. The tin plating layer on the workpiece has good corrosion resistance and solderability. After comparing several types of acid tin plating brighteners at the same time, Mr. Xu decided to buy a bucket of Sn-807 to try.
Under the detailed guidance of engineers, Mr. Xu used this acidic tin plating additives Sn-807, which significantly improved the dispersion and solderability of the workpiece coating. The quality of the workpiece coating can fully meet customer requirements, and the stability of the plating solution is good, the product defect rate is low, production is more labor-saving, and production costs are saved by 20%.
Therefore, during the production process, the dispersion ability of acidic tin plating solution is poor and it is easy to hydrolyze. Try Bigley's acid tin plating brightener Sn-807 quickly to reduce the product defect rate and save production costs. If you are interested in this acidic tin plating brightener, please contact Bigley customer service for free samples and detailed technical information!
