The corrosion resistance and wear resistance of the electroless nickel coating of the workpiece are poor, try this medium phosphorus electroless nickel plating solution

The corrosion resistance and wear resistance of the electroless nickel coating of the workpiece are poor, try this medium phosphorus electroless nickel plating solution

Wed Aug 17 09:02:33 CST 2022

    Mr. Shen is the owner of an electroless nickel electroplating factory in Nantong, Jiangsu.Some time ago, due to the poor corrosion resistance and wear resistance of the workpiece coating after one of the customer's automotive switch parts was plated with medium-phosphorus chemical nickel, the workpiece had a short service life and was always complained by customers.So Mr. Shen wanted to find a medium phosphorus electroless nickel plating solution with good corrosion resistance and wear resistance of the coating.

    One day, Mr. Shen found Bigolly's Ni-809 by searching the Internet for "electroless nickel plating solution".Mr. Shen is more concerned about the uniformity, corrosion resistance and wear resistance of the coating. After understanding Mr. Shen's production process, the Bigolly engineer explained patiently,this electroless nickel plating solution Ni-809 is a new generation of lead-free and cadmium-free electroless nickel process.The uniformity of the coating is good, even in blind holes and gaps, a uniform electroless nickel coating can be obtained, and the coating has high hardness and good wear resistance, and can pass the 96-hour neutral salt spray test.

    After considering it, Mr. Shen asked whether the proofing test can be carried out. The reason is that this kind of switch accessories is applied to the fuel injector of automobiles.If the corrosion resistance and wear resistance of the coating are poor, the fuel injection hole will be enlarged and the fuel injection volume will be increased, thereby accelerating the damage of the engine.So Bigolly engineer agreed to make a sample of Mr. Shen's workpiece.

    A week later, Mr. Shen received the use sample and tested the corrosion resistance and wear resistance of the workpiece.Soon, this batch of workpieces passed Mr. Shen's performance test, and the corrosion resistance and wear resistance were much better than before.So Mr. Shen signed a cooperation agreement with Biugolly.

    Therefore, when our workpieces have poor corrosion resistance and wear resistance in the process of electroless nickel plating, we may try this medium phosphorus electroless nickel plating solution Ni-809.If you are also looking for such a medium phosphorus electroless nickel plating solution, you may wish to contact Bigolly customer service to obtain free samples and detailed technical information!