Mr. Weng is the boss of an electroplating factory in Xiamen, Fujian, which specializes in tinning electronic components.Recently, Mr. Weng found that the brightness of the workpiece coating was poor during the process of using the tin plating additive, and there was color fading during placement, which would increase the resistance of the coating and affect the performance of the workpiece.So Mr. Weng wants to find a tin plating additive with good brightness and no fading.
One day, Mr. Weng found Bigolly's methanesulfonic acid tin plating additive Sn-819 on the Internet, and asked about the brightness of the workpiece after the use of this additive and whether there would be discoloration during storage.After understanding the production situation of Mr. Weng, the engineer explained that,This tin plating additive Sn-819 adopts the new R&D technology of Bigley and adds high-performance bath stabilizer, which can significantly improve the service life of the bath. Moreover, the formula of the additive is reasonable, and it can obtain a uniform and bright tin coating in a wide range of temperatures and currents.In addition, this brightener adopts Bigley's anti discoloration treatment technology, which can ensure that the workpiece tin coating will not discolor for a long time, and solve the problem that the coating is easy to discolor.
After considering, Mr. Weng decided to buy two barrels to try.Half a month later, Mr. Weng reported that after using this tin plating additive Sn-819, the plating solution was more stable, the current efficiency was much higher, and the brightness of the workpiece coating was very good. After a long period of high temperature and steam aging tests, the workpiece could still maintain its bright color and excellent welding performance.In this way, the plating solution is more durable, and the production cost is saved, and the defective rate of products is greatly reduced.Therefore, Mr. Weng placed an order again and signed a cooperation agreement with Bigolly.
Therefore, the brightness of the coating on our workpiece is poor and easy to fade during the tin plating process. Try this methanesulfonic acid tin plating additive Sn-819 immediately.If you are interested in this methanesulfonic acid tin plating additive, please contact the Bigolly customer service for free samples and detailed technical information!