During aluminum machining, the surface of aluminum alloy parts is often contaminated with various oils, residual polishing paste, hand prints, oil seals, surface waxes and other contaminants. In order to ensure the quality of subsequent plating or oxidation treatment, the degreasing of the aluminum surface is crucial. However, aluminum has poor chemical stability and is prone to corrosion in alkaline or acidic environments. How to avoid corrosion of the substrate while removing oil has become a major challenge in the development of aluminum degreasing powders.
The difficulty of degreasing aluminum mainly stems from its surface characteristics, the type and adhesion of the oil and the chemical stability of the aluminum itself. Aluminum and its alloy surface has a naturally occurring alumina film, this layer of oxide film has good corrosion resistance, but can also hinder the cleaning agent and oil contact, increasing the difficulty of degreasing. At the same time, the aluminum processing process uses a variety of types of grease, including machine oil, grease, wax oil, etc., these oils are often strong adhesion, more difficult to remove. Different types of grease require different cleaning agents and processes, increasing the complexity of the degreasing operation.
For the difficulties in the aluminum degreasing process, Bigely aluminum degreasing powder BC-19 provides an effective solution. The degreasing powder contains surfactants that can quickly remove all kinds of stubborn oils under mild alkaline conditions without damaging the aluminum surface. Compared to conventional strong alkaline cleaners, BC-19 can effectively avoid corrosion problems on aluminum. At the same time, BC-19 has a wide range of applicability and is effective not only for aluminum, but also for degreasing of plating of plastic parts.
About us
Guangdong Bigely Technology Co., Ltd. ,founded in 2003, is a high-tech enterprise integrating R & D，production, sales and service, specializing in the production of electroplating additives. As a famous electroplating additives source manufacturer in China, Bigely has over 20 years' experience in electroplating additives production and own production base of 5000 square meters. We can produce 15,000 tons of electroplating additives every year, which can fully meet the needs of customers.
Our products are widely used to meet the plating needs of different industries and exported to many countries from all over the world. They can meet the environmental protection standard after use, mainly used in automobile parts, sanitary ware, electronic products, hardware, furniture, building accessories and other fields.
If you need our high-quality electroplating additives, please contact us. We can provide you samples to you for test, and also provide a series of services.
