Mr. Zhao's company is a company in Zhaoqing that processes and electroplates NdFeB workpieces.Their workpieces are mainly produced by barrel zinc plating.Recently, Mr. Zhao's workpiece is very brittle when the galvanized layer is thick, and the plating solution has been adjusted several times, but it still remains unresolved.This made Mr. Zhao want to replace an acid zinc plating brightener with low coating brittleness.
So Mr. Zhao found Bigolly's acid galvanizing brightener BZ-528 through Internet search, and consulted engineers in detail about the characteristics and operating parameters of this zinc plating brightener.This brightener has fast light output, strong depth capability and leveling performance, and the coating is soft and brittle, and the 20-micron-thick coating will not fall off when bent. It is very suitable for the galvanizing requirements of Mr. Zhao's workpiece.So, Mr. Zhao first bought a small package of zinc plating brightener BZ-528.
Under the guidance of the engineer, the workpiece produced by Mr. Zhao using Bigolly's zinc plating brightener BZ-528 has a more uniform coating thickness and no brittleness.In contrast, the use of this zinc plating brightener BZ-528 coating deposition is faster, the stability of the plating solution is good, and the workpieces meet the customer's requirements, which can save about 15% to 20% of the production cost.So, Mr. Zhao signed a purchase contract with Bigolly.
Therefore, our NdFeB workpieces are brittle during the production of zinc electroplating, so try Bigolly's acid zinc plating brightener BZ-528.If you are also looking for an acid galvanized brightener with low coating brittleness,you may contact Bigolly customer service to get free samples and detailed technical information!
