• In the electroplating industry, proper control of additives in nickel baths, especially nickel plating softeners, is crucial to ensure the quality of the nickel layer. A moderate amount of additives can optimize the brightness and toughness of the nickel layer, however, an excessive amount of softener can lead to a series of problems, such as increased brittleness and stress concentration of the nickel layer, and can even cause cosmetic defects and decreased adhesion. As a result, determining whether the amount of softener in the nickel plating bath is appropriate becomes a critical step in the plating process.

    Tue Jun 25 08:37:43 CST 2024

  • During the plating degreasing process, it is important to properly clean grease and dirt from the workpiece, especially from inside the blind holes, as this ensures uniformity, adhesion and overall quality of the plated layer. Here are some suggestions for cleaning blind holes in plated parts:

    Mon Jun 24 10:20:27 CST 2024

  • Electrolytic oil removal in electroplating production is a pretreatment process that utilizes an electrolytic process to remove oil and organic contaminants from the surface of metal workpieces. Cleaning the metal surface prior to plating is critical, as oil and grease can hinder the uniform deposition of the plating layer and may lead to quality problems such as peeling and flaking of the plating layer. Electrolytic oil removal powder is a chemical agent used in industrial production to remove grease and other impurities from metal surfaces, mainly by electrolysis. The following factors should be considered when selecting a suitable electrolytic degreasing powder:

    Sat Jun 22 08:35:31 CST 2024

  • In the electroplating process, removing wax is an easily overlooked but important production process. In this article, we will introduce the definition of dewaxing water and the role of Bigely dewaxing water in the electroplating production process.

    Sat Jun 22 08:14:44 CST 2024

  • As we all know, in the production process of plastic plating, the colloidal palladium adsorbed on the surface of the plastic workpiece after palladium activation does not have catalytic activity, which is due to its surroundings are wrapped by divalent tin ions, the use of plastic plating accelerator can dissolve the palladium around the divalent tin so that it is exposed to deal with, so that palladium ions will have catalytic activity. So what do we need to pay attention to when we use the plastic plating accelerator?

    Wed Jun 19 08:47:43 CST 2024

  • Inadequate roughening during the plastic plating production process can cause a number of problems that can affect the quality and performance of the final product. The following are problems that may be caused by inadequate roughing:

    Wed Jun 19 08:12:38 CST 2024