Bigely BZ-513 alkaline cyanide-free galvanizing brightener is a environmentally friendly galvanizing process.
In the bright nickel plating process, slowing down of the deposition rate is a common problem but is crucial for improving production efficiency. Choosing the right nickel plating brightener is therefore particularly important, and Bigely Ni-301 nickel plating brightener is ideal for solving this problem.
Electrolytic degreasing in electroplating production is a pretreatment process that utilizes an electrolytic process to remove grease and organic contaminants from the surface of metal workpieces. Cleaning the metal surface prior to plating is critical, as oil and grease can hinder the uniform deposition of the plating layer and may lead to quality problems such as peeling and flaking of the plating layer. Electrolytic degreasing powder is a chemical agent used in industrial production to remove grease and other impurities from metal surfaces, mainly by electrolysis. The following factors should be considered when selecting a suitable electrolytic degreasing powder:
Choosing the right passivator is essential to improve salt spray resistance. Bigely zinc-nickel alloys blue passivator Zn-323, performs well in practical applications. In the Neutral Salt Spray Accelerated Corrosion Test (NSS), Zn-323 showed white rust for more than 240 hours and red rust for more than 1,000 hours. It was able to provide protection for a longer period of time. The use of Zn-323 passivate can form a dense and non-porous passivation film on the surface of the plated layer, effectively blocking the intrusion of corrosive media and thus improving the salt spray resistance of the plated layer.
After we perform palladium activation in the plastic plating process, we also need plastic plating accelerator. What is plastic plating accelerator and why is Bigely plastic plating accelerator PL-6A suitable for you?
Electroless copper plating is a process in which copper ions are reduced by reducing agent and deposited on the surface of conductive substrate without current. The brightness of the coating is one of the important indexes to measure its quality. In order to achieve high brightness of the coating, the choice of additives is very important. The MID rapid electroless copper plating additive HS-ECu-801 developed by Bigely has become the ideal choice for many electroplating plants to pursue high brightness coatings due to its good performance.
