Steel electrolysis degreasing powder

Steel electrolysis degreasing powder

BC-1105 Steel electrolytic oil powder

Description :

BC-1105 is an alkaline and high- performance electrolytic degreasing agent that can effectively remove all organic and passivation films on the surface of the metal, thereby improving the appearance of electroplating and obtaining a glossy and uniform coating.

Features and advantages :

application:

It is used in the degreasing treatment of oily steel . If the surface area of the degreasing tank is too small, the current density must be increased during operation. At this time, the foam layer generated on the surface of the tank will quickly release the gas generated during the operation. hair angry burst phenomenon, also can be used on a nickel plated substrate peeling chrome plating.

Operating conditions and equipment :

In order to exert the degreasing effect during operation, the current density should not be lower than 2.7A/dm. The advantage of anode electrolysis is that it can remove the dirt film, improve the smoothness and corrosion resistance of the metal surface, and reduce the problem of poor adhesion of the coating. electroplating process has good adhesion and gloss, it is necessary to completely eliminate the dirt and metal surface of the passive film , and the use of nickel-plated steel plate as the cathode, an electrode plate and regular cleaning of heavy deposits.

Bath method :

1. Thoroughly clean the tank with tap water.

2. Add pure water to 2/3 level and heat to 50°C.

3 was slowly added to the BC-1105 , and stirred to dissolve ( Wear protective gear , safety )

4. Reheat to operating temperature.

5. The analysis is correct and ready to use.

Troubleshooting:

1 . Electrolytic degreasing operation, the position of the note selection electrode to ensure security degreasing effect.

2. The following factors improper control the burning phenomenon occurs:

a . Temperature or concentration is too low

b . Voltage is too high

c . Current density is too high

d . Degreasing agent composition and metal substrate are inappropriate

Analysis method :

1. the vessel take 10 ml sample product in 250 ml of cone -shaped flask, then 50 ml dilution water of.

2. Add 3-5 drops of PP indicating agent 3 with 0.5N HCl solution was titrated until pale red color extinction loss as the end point .

4. Record the titration ml Number

5. Calculation :

mL 0.5N HCl × 2.7 = g/L BC-1105

Matters needing attention :

BC-1105 is an Species dry drying alkali resistance was substance , care must be taken when storing acidic substance minutes apart . When dosing Please wear goggles or protective clothing , when in contact with the skin, please rinse immediately with plenty of water, immediately sent to the medical treatment .

Wastewater treatment :

BC-1105 is a basic , non- phosphate , readily biodegradable, the waste liquid is neutralized with acid to PH value of 6-8 when can releasing.

Ordering information :

productProduct numberpackage

Steel electrolysis oil powderBC-110525kg/ bag

FAQ

1. Q: Do you make the products yourself? Are you a trader or a manufacturer?

A: Yes, the products are produced by our company. Our company is a manufacturer focusing on the R&D and manufacturing of environmental protection electroplating additives. Our factory has 5000 square meters with an annual capacity of 15000 tons.

2. Q: Can your company send samples for trial?

A: We can provide samples for trial.

3. Q: What is the quality of your products?

A: Our company all products core raw materials is used by Germany BASF, American Dow Chemical and other international brand products. The production process is strictly in accordance with the ISO9001 quality management system, from the incoming inspection, product inspection, according to the strict inspection standard, ensure that every drop of products qualified. Product quality you can rest assured, like BYD, Huawei, Foxconn such enterprises are also using our products.

4. Q: How long is the shelf life of your products?

A: The shelf life of our products is two years. If you do not use up the products within a short time after you buy them, we suggest you store them in a cool place, not in the sun or in a high temperature environment.

5. Q: Are your products environmentally safe?

A: Our products have passed the SGS test and are recognized as "Green and Environment-friendly Promotion Products". Many auto parts and electronic products which use our products can pass the strict environmental protection test when they are exported to Europe and America. Therefore, we can be trusted in terms of environmental protection and safety.

6. Q: Can your company provide technical services?

A: Yes, our company has a technical service team of more than 10 people. The technical engineers all have more than 20 years' experience in electroplating factory. They can provide customers with comprehensive technical of pre-sales and after sales.

7. Q: Is it possible to visit your company?

A: Yes, of course. You are very welcome! We can meet you at Jieyang airport, If you can come to our city. Also you can visit our factory through live video.

8. Q: Can you customize products according to our needs?

A: Yes, our company has research and development strength, the product formula derived from Europe and the United States laboratory, European and American engineers technical support, work together with domestic universities. Our company has a member of Guangdong province expert enterprise workstation, Shantou university science and technology correspondent workstation, Jieyang city environmental protection engineering research center for electroplating additive.Therefore, it can meet all kinds of customized requirements proposed by customers.