Products
In addition to wax powder
BC - 1 6 In addition to wax powder
Product Code No. 1 101 6
Description : BC-16 dewax powder is suitable for die-casting zinc alloy, and can also be used for degreasing of copper substrate. Using BC-16 wax removal powder can remove all kinds of grease without any difficulty.
BC-16 in addition to wax the same sample can be used in ultrasonic degreasing operations concentration 30-45 G / L , a temperature of 88-93 when ℃, very excellent effects can be obtained.
Operating conditions :
|
concentration |
A ) Immersion of degreasing BC-16 wax powder |
60-90 g/L |
|
|
B ) Ultrasonic degreasing BC-16 wax powder |
30-45 g/L |
|
temperature |
88-93 ℃ |
|
|
time |
2-5 minutes |
|
|
equipment |
stainless steel |
|
|
Stir |
Mechanical stirring |
If stirring with air, please note that the liquid level must be 13-15 cm below the edge of the groove to avoid overflow |
Use :
BC-16 in addition to wax the most important factor in the operation, a high temperature must be maintained, and appropriate arrangement of the degreasing process, the general operation of the operating temperature must be 88 deg.] C, if operation at low temperatures will occur defatted difficult.
Analysis method :
1 , the vessel taking 10 ml sample to 250 ml Erlenmeyer flask.
2 , pure water was added 150 ml .
3 , a few drops of bromophenol blue indicator.
4 , in a 0.5N HCl solution was titrated to a yellow endpoint.
5 , record the titration ml Number
Calculate ml of 0.5N HCl × 8.9 = BC-16 wax removal powder g/L
Wastewater treatment :
BC-16 wax removal powder has no difficulty in wastewater treatment. The wetting agent in the ingredients is easily decomposed by microorganisms. As long as the pH is adjusted to 7.5-8.0 , it can be discharged directly, but do not adjust to below 7.5 to avoid precipitation. .
Safety note :
BC-16 wax removal powder is an alkaline substance. Be careful not to contact with eyes or skin. When adding medicine, please wear goggles and protective clothing. Rinse exposed parts of the body with plenty of water. If any injury occurs, send it to a doctor immediately.
Ordering information :
|
product |
Product number |
container |
|
BC-16 wax removal powder |
11 016 |
25KG |
FAQ
1. Q: Do you make the products yourself? Are you a trader or a manufacturer?
A: Yes, the products are produced by our company. Our company is a manufacturer focusing on the R&D and manufacturing of environmental protection electroplating additives. Our factory has 5000 square meters with an annual capacity of 15000 tons.
2. Q: Can your company send samples for trial?
A: We can provide samples for trial.
3. Q: What is the quality of your products?
A: Our company all products core raw materials is used by Germany BASF, American Dow Chemical and other international brand products. The production process is strictly in accordance with the ISO9001 quality management system, from the incoming inspection, product inspection, according to the strict inspection standard, ensure that every drop of products qualified. Product quality you can rest assured, like BYD, Huawei, Foxconn such enterprises are also using our products.
4. Q: How long is the shelf life of your products?
A: The shelf life of our products is two years. If you do not use up the products within a short time after you buy them, we suggest you store them in a cool place, not in the sun or in a high temperature environment.
5. Q: Are your products environmentally safe?
A: Our products have passed the SGS test and are recognized as "Green and Environment-friendly Promotion Products". Many auto parts and electronic products which use our products can pass the strict environmental protection test when they are exported to Europe and America. Therefore, we can be trusted in terms of environmental protection and safety.
6. Q: Can your company provide technical services?
A: Yes, our company has a technical service team of more than 10 people. The technical engineers all have more than 20 years' experience in electroplating factory. They can provide customers with comprehensive technical of pre-sales and after sales.
7. Q: Is it possible to visit your company?
A: Yes, of course. You are very welcome! We can meet you at Jieyang airport, If you can come to our city. Also you can visit our factory through live video.
8. Q: Can you customize products according to our needs?
A: Yes, our company has research and development strength, the product formula derived from Europe and the United States laboratory, European and American engineers technical support, work together with domestic universities. Our company has a member of Guangdong province expert enterprise workstation, Shantou university science and technology correspondent workstation, Jieyang city environmental protection engineering research center for electroplating additive.Therefore, it can meet all kinds of customized requirements proposed by customers.
