We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
In the link of electroplating treatment, pre-treatment oil removal is an important link, which will affect the subsequent production. Therefore, strict cont...
In the process of using decorative chrome plating additives, sometimes the coating surface of the workpiece looks very rough, which will seriously affect th...
In the production process of using acid copper plating brightener, sometimes the concentration of various components in the plating solution is normal, and ...
A customer asked that when using nickel plating additives for production, some electronic products are coated with nickel, and then the tin coating is easy ...
In the production process of using acid copper plating brightener, the high current area of the workpiece is prone to scorch, which will seriously affect th...
A friend is constantly experiencing burning in the high current area of the workpiece produced during the use of acid copper brightener, which is very frust...
During the process of using acidic zinc plating brighteners, we sometimes find that the coverage ability of the zinc coating on the produced workpiece is po...
Four Reasons for Poor Tin Coating Coverage During the Use of Matte Tin Additives
In hardware plating, the substrate of most plated parts is steel. The steel surface must be pre-plated before electroplating acid copper, and alkaline coppe...
Semi-bright nickel process and bright nickel plating process are two different plating technologies. Although both involve plating a layer of nickel on the ...
