We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
Cast iron workpiece in the use of alkaline zinc-nickel alloy additives due to its processing special, complex structure, and cast iron surface is easy to ru...
In the link of electroplating treatment, pre-treatment oil removal is an important link, which will affect the subsequent production. Therefore, strict cont...
In the process of using decorative chrome plating additives, sometimes the coating surface of the workpiece looks very rough, which will seriously affect th...
In the production process of using acid copper plating brightener, sometimes the concentration of various components in the plating solution is normal, and ...
A customer asked that when using nickel plating additives for production, some electronic products are coated with nickel, and then the tin coating is easy ...
In the production process of using acid copper plating brightener, the high current area of the workpiece is prone to scorch, which will seriously affect th...
A friend is constantly experiencing burning in the high current area of the workpiece produced during the use of acid copper brightener, which is very frust...
During the process of using acidic zinc plating brighteners, we sometimes find that the coverage ability of the zinc coating on the produced workpiece is po...
Four Reasons for Poor Tin Coating Coverage During the Use of Matte Tin Additives
