We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
A customer inquired and found that during the process of using semi bright nickel additives, it was found that the semi bright nickel layer of the same work...
Reasons for easy oxidation and discoloration of the workpiece coating during the use of acid copper brighteners
During the process of using trivalent chromium black passivation agent for galvanizing, we sometimes find flow marks on the surface of the produced workpiec...
A customer inquired that during the process of using potassium chloride zinc plating brightener, there was always fogging in the low area of the test piece ...
Reasons for insufficient brightness of the workpiece in the middle of the hanger during the application of bright acid tin plating additives
In the production process of using sulfate tin plating additives, the concentration of Sn2+ in the plating solution is often out of control.With the prolong...
In the plating process using hard chrome additives, localized non-plating is a common problem. This not only affects the aesthetics and uniformity of the pl...
A friend consulted and said that during the process of using bright nickel plating additives, there is a particle sensation on the surface of the workpiece ...
Some customers inquired that during the production process using semi-bright nickel additives, the bonding of the plating layer is poor, resulting in the se...
A customer inquired that during the production process using semi-bright nickel additives, the bonding of the plating layer is poor, resulting in the semi-b...
