We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
Reasons for insufficient brightness of the workpiece in the middle of the hanger during the application of bright acid tin plating additives
In the production process of using potassium chloride zinc plating additive, we sometimes find that the consumption of brightener is relatively large, and w...
In the production process of using sulfate tin plating additives, the concentration of Sn2+ in the plating solution is often out of control.With the prolong...
In the plating process using hard chrome additives, localized non-plating is a common problem. This not only affects the aesthetics and uniformity of the pl...
A friend consulted and said that during the process of using bright nickel plating additives, there is a particle sensation on the surface of the workpiece ...
Some customers inquired that during the production process using semi-bright nickel additives, the bonding of the plating layer is poor, resulting in the se...
A customer inquired that during the production process using semi-bright nickel additives, the bonding of the plating layer is poor, resulting in the semi-b...
Some customers reported that when the temperature is higher, the bath temperature will be higher. At this time, the workpiece zinc coating will appear white...
A customer inquired that in the production process of using matte tin additives, the workpiece tin plating layer appeared poor uniformity phenomenon, what i...
During the process of using sulfuric acid type matte tin additives, we sometimes find streaks on the coating of workpieces. What is the reason for this?
