We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
A customer inquired that in the production process of using matte tin additives, the workpiece tin plating layer appeared poor uniformity phenomenon, what i...
During the process of using sulfuric acid type matte tin additives, we sometimes find streaks on the coating of workpieces. What is the reason for this?
When aluminum workpieces are produced using medium-phosphorus electroless nickel plating solution, sometimes the coating appears mottled. Although it does n...
A customer inquired that during the use of zinc nickel alloy black passivator, the passivation of the workpiece was followed by sealing treatment, and the a...
In the process of using nickel plating additives, sometimes the contact point between the workpiece and the copper hook of the hanger will be dark and black...
Acid copper plating process is a plating process that uses an acidic copper sulfate solution as the electrolyte. The process utilizes a DC power source to d...
In the production process of using alkaline galvanizing additives, sometimes such a phenomenon occurs: the drum suddenly explodes while rotating. What is th...
Many zinc plating brightener agents consider many factors when searching for zinc plating brightener brands, but there is one factor that must be considered...
In the tin plating process, the peeling off of the tin layer is a problem that not only affects the appearance quality of the product, but can also have a s...
Some customers reported that in the process of using high-speed tin plating additives, sometimes there are too many foam in the plating solution, which is e...
