We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
In the production process of using acid zinc plating brightener, if the workpiece falls into the plating tank and is not pulled out in time, what will be th...
In the production process of using alkaline zinc plating brightener, we often see that the galvanizing tank is followed by several filters to filter the pla...
Some customers have asked that in the production process of using matte tin additives, sometimes the workpiece low area coating is prone to leakage plating ...
Some customers inquired that in the production process of using matte tin additives, sometimes the plating in the low area of the workpiece is prone to leak...
In the production process of using nickel plating brightener, we sometimes find that the iron ions in the plating solution are relatively high,The brightnes...
Mr. Chen's barrel plating line using potassium chloride galvanizing additive has been stable.However, in the past few days, it was found that the coating of...
When we use sulfate tin plating brightener to produce, because of the particularity of stannous ions in the plating solution, the strong acidity of the plat...
In the process of using sulfate tin plating brightener, some large areas of workpieces have white spots on the coating around the seam, which seriously affe...
In recent years, galvanized trivalent black passivation process has been widely used because of its advantages of low cost and good performance.In the proce...
Metal salts and reducing agents coexist in the high-phosphorus electroless nickel plating solution and are in a metastable state.Proper maintenance of the b...
