We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
Due to production needs, Mr. Chen thinks that the plating speed of his electroless copper plating solution is slow, only 2-3 μm/hour, seriously affecting th...
Recently, when Mr. Mai used electroless nickel plating solution, the coating surface of the workpiece after chemical nickel plating is normal, but after hot...
In the process of using nickel plating additives, sometimes the adhesion of the double-layer nickel layer of the workpiece is poor, and the performance test...
In the process of using organic acid fog tin additive, what matters should we pay attention to during production in order to ensure the smooth and uniform c...
In the process of using organic acid matt tin additive, what matters should we pay attention to in production in order to ensure the smoothness and uniformi...
In the production process of bright copper electroplating, we can quickly obtain good brightness, filling and displacement ability by adding acid copper pla...
In the production process of using acid zinc plating brightener, if the workpiece falls into the plating tank and is not pulled out in time, what will be th...
In the production process of using alkaline zinc plating brightener, we often see that the galvanizing tank is followed by several filters to filter the pla...
Some customers have asked that in the production process of using matte tin additives, sometimes the workpiece low area coating is prone to leakage plating ...
Some customers inquired that in the production process of using matte tin additives, sometimes the plating in the low area of the workpiece is prone to leak...
