We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
When using acid copper brightener to prepare plating solution, how to judge whether the quality of plating solution is good? To answer this question, we can...
Degreasing before plating is an indispensable step in the plating process, and is the key to ensure good adhesion and surface finish of the plated layer. Th...
Oil removal is an indispensable step in the plating process and is the key to ensuring good adhesion and surface finish of the electroplating. This article ...
Electroless copper plating refers to a process in which copper layers are deposited on the surface of a material without the need for an electric current. T...
The use of Cu-510, a dye-based acid copper brightener, is not only widespread but also of particular importance in the electroplating process. Cu-510 is an ...
When we use acid zinc plating brightener in the production process, sometimes the coating of the workpiece will appear streaks, what is going on?
When the copper pyrophosphate brightener is used in electroplating production, the plating layer is prone to streak failure, what is the cause of this, and ...
What is the purpose of ammonia when using a copper pyrophosphate brightener? How to control its content? Let's analyze it in this issue.
What is the purpose of doing the Hull Tank Test when using alkaline galvanizing additives in a plating plant? Let's analyze it today.
