We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
In the chrome plating process, sometimes the surface of the workpiece produced is cracked at the tip position or edge area, which can seriously affect the a...
Electrolytic degreasing technology has been widely used in electroplating, metal processing and other fields. In this paper, we will introduce the basic pri...
When we use electroless nickel plating solution for production, because most of the reducing agents used are hypophosphite, phosphite ions will inevitably b...
Mr. Xie is the owner of a chemical nickel electroplating factory in Tianjin. His production line mainly focuses on the processing and production of high pho...
In the production process of using electroless nickel plating solution, sometimes the electroless nickel coating of the workpiece will be rough, which will ...
In the production process of using alkaline galvanizing brightener, sometimes the galvanized layer of the workpiece will appear pitted small bubbles, which ...
In the production process of alkaline galvanizing, sometimes there will be pitted bubbles in the galvanized layer of the workpiece, which will seriously aff...
When we use the trivalent chromium blue zinc passivation solution, the galvanized workpiece can obtain a good bright blue appearance.However, sometimes yell...
In the process of using Acidic zinc plating additives, the potassium chloride in the plating bath mainly plays a conductive role. During the production proc...
In the electroplating industry, acid copper brighteners are widely recognized as important additives to enhance the appearance of the plated layer. Acid cop...
