We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
A customer inquired about the poor leveling effect of the plating solution during the production process using nickel plating brighteners.
In the production process of using nickel plating brightener, the plating solution is weakly acidic,In addition to the deposition of the nickel layer, the w...
When we use chrome plating additives, we will find that the anode plate used for chrome plating is special, which is insoluble anode plate such as lead and ...
In the process of galvanizing production, after color passivation of galvanized workpieces in some factories, the color of passivation film is always not re...
Mr. Li from Qingdao, Shandong is the owner of an electroplating factory engaged in galvanizing processing of various hardware standard parts, mechanical equ...
Mr. Zhang used the acid tin plating brightener to prepare the bath after new preparation. Although the coating color of the workpiece was uniform after tin ...
In the alkaline galvanizing process, the production line is designed according to the plating speed of the workpiece, which can ensure that the coating thic...
In the production process of the alkaline galvanizing process, various failures will inevitably occur, such as poor bonding, scorching, and poor positioning...
Mr. Sun from Jining, Shandong is the owner of an electroplating factory engaged in various electroplating processes.
In the alkaline galvanizing process, sometimes the workpiece is very clean in the pretreatment, but the coating foams after alkaline galvanizing.Is this cau...
