We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
If you want to know what proportion of hard chrome plating additives to be added, you must first understand the composition ratio and scope of application o...
In the production using hard chrome additives, chrome mist inhibitor plays a vital role as an additive. It can not only effectively inhibit the generation o...
In the nickel electroplating production, the big consumption of barrel nickel brightener will undoubtedly increase the cost of production, so it is necessar...
In the nickel electroplating production, the big consumption of barrel nickel brightener will undoubtedly increase the cost of production, so it is necessar...
In the pyrophosphate copper plating process, the Hull cell test is a conventional method used to evaluate the performance of plating solutions and process p...
Yellowing of zinc-nickel alloy plating in the low current region is usually related to process parameters, bath composition and operating conditions. The fo...
When we use medium phosphorus electroless nickel plating solution to produce, sometimes the coating of the workpiece appears dull and dull. What is the reas...
In the production process of using acid zinc plating brightener, sometimes such a phenomenon occurs: the current is not adjusted very much, and the coating ...
Mr. Shi was introduced by a friend to use the medium phosphorus electroless nickel plating additive, but after using this additive, the plating solution is ...
In the production process of using alkaline zinc plating brightener, sometimes the low area of the workpiece will turn black, what should I do?
