Bright nickel plating has developed the characteristics of "three highs and one low" in operation, namely high concentration, high temperature, high current density and low pH value. So why control it in this way? In this issue's article, we will introduce it so that electroplating plants can better use nickel plating additives.
When the concentration of nickel sulfate in the plating solution is high, its electrical conductivity is better, the range of process conditions will be wider, allowing operators to use a higher current density, which is conducive to improving the following three aspects:
① Deposition rate
② The brightness of the coating
③ Coating leveling property
However, it will also bring some problems, such as poor uniformity of the plating solution, high cost and large carry-out loss. Therefore, its concentration needs to be well controlled under the guidance of an electroplating engineer.
About us
Guangdong Bigely Technology Co., Ltd. ,founded in 2003, is a high-tech enterprise integrating R & D，production, sales and service, specializing in the production of electroplating additives. As a famous electroplating additives source manufacturer in China, Bigely has over 20 years' experience in electroplating additives production and own production base of 5000 square meters. We can produce 15,000 tons of electroplating additives every year, which can fully meet the needs of customers.
If you need our high-quality electroplating additives, please contact us. We can provide you samples for test, and also provide a series of services.
